QSI 683wsg Cooled Monochrome CCD Telescope Camera with Mech'l Shutter, 8-Pos. CFW, and IGP with STi Thread

ITEM #
QS-683WSG-F-8
  • Sale
  • Regular price $4,015.95
  • QSI 683wsg Cooled Monochrome CCD Telescope Camera with Mech'l Shutter, 8-Pos. CFW, and IGP with STi Thread

    • Sale
    • Regular price $4,015.95
    • ITEM #
      QS-683WSG-F-8

    0
    Free Shipping
    Already have gear? Trade it in for cash or new equipment.

    QSI 683wsg Cooled Monochrome CCD Telescope Camera with Mech'l Shutter, 8-Pos. CFW, and IGP with STi Thread

    This QSI 683wsg Cooled Monochrome CCD Telescope Camera with Mechanical Shutter, 8-Position Color Filter Wheel, and Integrated Guider Port with STi Thread: employs the popular 8.3 megapixel Kodak (now TrueSense) full frame CCD imaging sensor. The KAF-8300 offers a large field of view in cameras using standard 1.25-inch filters. The 5.4 micron pixel size provides extremely high resolution. The sensor uses true two-phase charge transfer technology with a transparent gate that significantly increases optical response compared to traditional front illuminated full frame sensors. The superb imaging performance of 683 WSG camera is wrapped in an attractive, compact design with outstanding power efficiency and investment protecting upgrade-ability. The refined engineering and impressive fit, finish and attention to detail will surpass your highest expectations.The QSI 683wsg camera system is supported by industry-leading astronomy and microscopy image acquisition software, and a full camera control API is available for creating custom Windows or Linux applications.

     

    QSI 683WSG CCD Camera Highlights

    • The QSI 683 camera comes with a TrueSense KAF-8300 sensor, with 8.3MP and a peak QE of 60-percent
    • All WSG models include an Integrated Guider Port (IGP). This one comes with threads for the SBIG STi.
    • An 8-Position Color Filter Wheel comes ready for your threaded 1.25-inch filters
    • High speed USB 2.0 with 16-bit output
    • Dual read rates of 800kHz and 8MHz with virtually undetectable read noise
    • Electronic shutter speeds to 100 microseconds
    • Internal, even-illumination mechanical shutter for dark and bias frames
    • Intelligent, programmable two stage TEC - cooling to 45-degrees C Below Ambient Temperature 
    • ASCOM-compatible Windows COM API
    • Linux drivers and API

     

    About the KAF-8300 Imaging Sensor: The QSI 683wsg camera employs a Kodak KAF-8300 full frame CCD image sensor with micro-lensing technology. The KAF-8300 has excellent quantum efficiency between 350 nm and 1000 nm with peak QE of 57-percent. Low dark current and high pixel charge capacity results in a dynamic range exceeding 70db. The sensor has anti-blooming protection and a fast electronic shutter. Micro lenses cover the surface of the CCD to focus the light into each 5.4 micron pixel, thereby increasing the optical response.

     

    Kodak KAF-8300 Specifications:

    • CCD Architecture: Full Frame
    • Micro-lensing: Yes
    • Anti-Blooming: Yes - 1000x suppression
    • Imager Size: 17.96 mm Wide x 13.52 mm High
    • Pixel Array: 3326 x 2507 active pixels
    • Total Number of Pixels: 8.3 megapixels
    • Pixel Size: 5.4 microns squared
    • Quantum Efficiency: Peak: 57-percent
    • Dark Current Doubling: 5.8-degree C
    • Intrinsic Read Noise: 8 electrons RMS
    • Dynamic Range: 70db

     

    About QSI Two-Stage TEC Cooling: The QSI 683wsg has a very efficient custom 2-stage thermoelectric cooler (TEC) subsystem. Intelligent, programmable cooling fans are integrated into the rear of the camera body to remove the heat generated by the cooler. Typically, forced air cooling lowers the regulated CCD temperature by up to 45 degree C below ambient utilizing 85% power. Tight +/- 0.1 degree C temperature regulation is maintained at temperature settings of 10 degree C below ambient and lower. A slim liquid heat exchanger (sold separately) can be attached to the rear of the camera body to increase the cooling further, up to 55 degree C below the temperature of the circulating fluid.

    The cooled CCD image sensor is positioned in a hermetically sealed environmental chamber and covered with an anti-reflection precision optical window. The sealed chamber is purged with an ultra dry noble gas to increase heat conduction and eliminate the possibility of frost forming inside the chamber. To extend the useful period before re-purging is required, a user-rechargeable micro-sieve desiccant is employed to scavenge water molecules that enter the chamber. It is located behind a sub-micron, gas-permeable membrane to prevent particulate contamination of the CCD chamber.

     

    QSI Integrated Guide Port WSG Upgrade: The QSI 600 Series WSG cameras provides a solution to the problems normally associated with guiding by integrating a Guider Port directly into the camera body. The pick-off prism is designed to sit in front of the filters so that you will always have all the star's light available for guiding.

    The large 1/2-inch square pick-off prism of the integrated guide port is optimally positioned close to the internal filter wheel, supporting the use of guide cameras with large sensors, while preventing any vignetting of the main sensor, even with very fast optical systems. This Integrated Guide Port (IGP) is designed to support the SBIG STi auto guider.

    The threaded adapter sits on top of the focus ring and allows the guide camera to be rotated to any position. The focus ring threads onto the focus base to allow 3 mm of travel when focusing the guide camera. Once focus is achieved, the focus ring is locked with a set screw. The guide camera can still be rotated manually if desired without changing the focus. The end result is a rigid, easily focused guide camera that will not move or flex while your mount tracks the apparent motion of the night sky.

     

     

    Additional Information

    Antiyes
    Camera Cooling TypeLiquid Cooled/ Optional & Thermoelectric Cooling (TEC)
    Camera SeriesQSI 600
    CooledCooled
    Dark Current<0.1 electron per second at 0 degreesC
    DimensionsW5.86" x H5.56" x D2.50"
    Filter WheelYes
    Free ShippingYes
    Front or Back IlluminationFront
    InterfaceUSB 2.0
    ManufacturerQSI
    Micro_lensing Sensoryes
    Operating System CompatibilityLinux (3rd Party) & Windows
    Peak QE57%
    Pixel Array3326 x 2504 (active
    Pixel Size5.4 microns
    Sensor DesignFull Frame
    Sensor ManufacturerTruesense formerly Kodak
    Sensor TypeCCD
    SensorON Semi KAF 8300M
    Shutter TypeDigital & Mechanical
    Warranty1 Year Warranty

    Questions & Answers

    Have a Question?

    Be the first to ask a question about this.

    Ask a Question