PlaneWave 17" CDK Corrected Dall-Kirkham Truss Telescope
PlaneWave 17" CDK Corrected Dall-Kirkham Truss Telescope
PlaneWave Instruments 17 inch f/6.8 CDK Telescope
Created to meet the demands of both the serious imager and visual observer, PlaneWave CDK, a revolutionary new telescope optical system invented by Dave Rowe, is offered at an unprecedented value for a telescope of this quality and aperture. The goal of the design was to make an affordable astrographic telescope with a large enough imaging plane to take advantage of the large format CCD cameras of today. The Corrected Dall-Kirkham (CDK) design far exceeds the off-axis performance of most commercial telescope designs, including the Ritchey-Chretien. The RMS spot sizes at the edge of a 35mm frame remain smaller than a single pixel on the most advanced CCD cameras available to amateurs today. Most telescope images degrade as you move off-axis from either coma, off-axis astigmatism, or field curvature. The CDK design suffers from none of these problems. The PlaneWave CDK is coma-free, has no off-axis astigmatism, and has a flat field. The design is a simple and elegant solution to the problems posed above. The CDK consists of three components: an ellipsoidal primary mirror, a spherical secondary mirror and a lens group. All these components are optimized to work in concert in order to create superb pinpoint stars across the entire 52mm image plane.
The PlaneWave CDK Optical Design
One of the unique features of the PlaneWave CDK design is its ease of collimation and achievable centering tolerance for a telescope of its class. This ease of alignment and collimation guarantees the user will be sure to get the best performance out of the telescope possible, each and every night. The end result at the image plane of the CDK design is pinpoint stars from the center of the field of view out to the corner of the field of view.
PlaneWave CDK Optical Performance
Below are two simulations showing the CDK's stunning performance. The first is a diffraction simulation and the second is a spot diagram. In both simulations the small squares are 9x9 microns, about the size of a CCD pixel. In the diffraction simulation the star images on-axis and off-axis are nearly identical. In the spot diagram, 21mm off-axis the spot size is an incredible 6 microns RMS diameter. This means stars across a 42mm image circle are going to be pinpoints as small as the atmospheric seeing will allow.
Both of the simulations take into consideration a flat field, which is a more accurate representation of how the optics would perform on a flat CCD camera chip. For visual use some amount of field curvature would be allowed since the eye is able to compensate for a curved field. The diffraction simulation was calculated at 585 nanometers. The spot diagram was calculated at 720, 585, and 430 nanometers. Many companies show spot diagrams in only one wavelength, but you cannot see the chromatic performance with only one wavelength.
Comparison: CDK vs Ritchey-Chretien
The simulations below compares the optical performance of the CDK design to the Ritchey Chretien (RC) design. The Ritchey design was popularized as an astro-imaging telescope due to its use in many professional observatories. Although very difficult and expensive to manufacture and align, the Ritchey is successful in eliminating many of the problems that plague many other designs, namely off-axis coma. However the Ritchey does nothing to eliminate the damaging effects of off-axis astigmatism and field curvature.
The CDK design tackles the off-axis coma problem by integrating a pair of correcting lenses into a two-mirror design. The beauty is that this design also corrects for astigmatism and field curvature. Because the lenses are relatively close to the focal plane (unlike the Schmidt corrector plate found in various Schmidt-Cassegrain designs), and because these lenses work together as a doublet, there is no chromatic aberration. The CDK offers a wide aberration-free, flat field of view that allows the user to take full advantage of the very large imaging chip cameras in the marketplace today.
Having an aberration-free telescope design means nothing if the optics cannot be aligned properly. Many Ritchey owners never get to take full advantage of their instrument's performance because the Ritchey is very difficult to collimate. Aligning the hyperbolic secondary mirror's optical axis to the optical axis of the primary mirror is critical in the Ritchey design, and the tolerances are unforgiving. The secondary mirror of the CDK design is spherical. It has no optical axis and so the centering tolerance of the CDK secondary mirror is comparatively huge. With the help of some very simple tools, the CDK user will be able to set the secondary spacing, collimate the optics and begin enjoying the full performance potential the instrument has to offer within a few minutes.
In the comparison shown above the drastic difference in performance between the CDK and the RC is apparent. The biggest component that degrades the off-axis performance of the RC is the defocus due to field curvature. In many diagrams shown by RC manufacturers, the diagrams look better than this because they are showing a curved field. This is fine for visual use because the eye can compensate for some amount of curvature of field. But CCD arrays are flat and so in order to evaluate the performance a spot diagrams and/or diffraction simulations requires a flat field as shown in this diagram.
PlaneWave 17 inch CDK Features
- Dual Carbon Fiber Truss Design: Minimizes thermal expansion which causes focus shift with changes in temperature
- Carbon Fiber Lower Light Shroud: Protects the primary mirror from damage and from stray light
- Dovetail expansion joint: Allows for the difference in thermal expansion between carbon fiber and aluminum. The expansion joint allows the aluminum dovetail to expand and contract without stressing the carbon fiber lower truss
- Cooling Fans: Three fans blow filtered air onto the back of the primary mirror to help it quickly equibrate to the ambient temperature. The fans are controlled by a switch on the optical tube or can be controlled by a computer if the optional EFA Kit is purchased.
Important Order Information:
- Typical wait time is about 90 days from the date of order.
- PlaneWave requires a 50% deposit at the time your order is placed. If you decide to cancel that order, the manufacturer will keep $800 from your deposit.
- This telescope comes with a dovetail. Please let us know the mount you will be using the CDK 17 inch on so that we can get you the proper one.
- We also need to know which CCD camera you will be using so that we can inform you of the proper adapters for your set-up.
- Shipping charges will be quoted separately. Just contact OPT for a shipping quote. The quote will include a shipping crate.
- The image shows the 17 inch CDK with CCD camera, which is sold separately.
Plane Wave Instruments Product Number: CDK17
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.