Used SBIG Remote Guide Head for STL and ST Series Cameras - SOLD
- This is a used guide head in very good condition
- Works with STL and ST series cameras*
- A must if using Narrowband filters
Used SBIG Remote Guide Head for STL and ST Series Cameras - SOLDThe Remote Guide Head is an optional accessory for t STL and newer ST series cameras that allows the convenience of self-guiding with the guider external to the camera and filter wheel if necessary. The same Remote Guide Head will work with any STL or ST model camera equipped with a Remote Guide Head port. The Remote Guide Head contains a cooled TC-237H guiding CCD with 657 x 495 pixels at 7.4 microns and uses a 16-bit A/D. This is the same guiding CCD that is built into STL and ST self-guiding cameras. It draws its power from the main camera and is controlled by the same software that controls the internal guider. When the Remote Guide head is attached to the camera, you can use your camera control software to select either the built-in (“internal”) tracking CCD or the Remote Head (“external”) CCD for self-guiding during long exposures. It has its own shutter for dark frames.
- SBIG remote guide head
- Connecting cable
- * ST cameras must have receptacle for guide head *
Questions & Answers
Have a Question?
Be the first to ask a question about this.