Used Celestron Off Axis Guider - UT-11925- SOLD -

ITEM #
UT-11925
  • Sale
  • $159.00
  • Regular price $239.00
  • Used Celestron Off Axis Guider - UT-11925- SOLD -

    • Sale
    • $159.00
    • Regular price $239.00
    • ITEM #
      UT-11925

    0
    Already have gear? Trade it in for cash or new equipment.
    • This is a used OAG in very good conditon
    • Fixed-Orientation Helical Focuser
    • The Most Accurate Way to Guide
    • Multi-Coated Prism with Aluminized Backing
    • Includes Adapter for various cameras
    • Ideal for Schmidt-Cassegrain and EdgeHD Telescopes

    Used Celestron Off Axis Guider - UT-11925- SOLD -

    The Off-Axis Guider is an essential astroimaging accessory for long focal length telescopes that require the most accurate guiding possible. The Celestron Off-Axis Guider uses a prism to intercept a small portion of the telescopes focal plane (outside the field of view of the main imaging camera) to locate a guide star. Any movement seen by the guide star will be the exact same movement seen by the imaging camera. Guiding this way will correct for tracking errors, as well as optomechanical errors or flexure. The result: better astroimages with pinpoint round stars.

    Off-Axis Guiders have been around for a long time, but typically pose three main challenges:

    1. Finding a guide star from the far edges of the telescopes focal plane can be difficult, considering the small field of view and sometimes less-than-ideal illumination.
    2. Getting both imaging camera and autoguider to reach focus with one another is time-consuming and sometimes requires experimentation.
    3. Additional spacers and adapters are usually required for your particular camera, telescope, and autoguider, which adds to cost and complexity.

    Celestron's Off-Axis Guider addresses these challenges by:

    1. Providing a large 12.5 mm prism that can be adjusted to move closer to the center of the telescopes focal plane, depending on the size of the imaging camera. This results in brighter guide stars, with the help of the large prism to fully illuminate the autoguider sensor.
    2. Featuring a high-quality, fixed-orientation Helical focuser. This provides extremely smooth and accurate focus of the autoguider without changing (or twisting) the autoguider camera orientation.
    3. All the needed spacers and adapters are included for most common imaging configurations, including DSLR cameras, Nightscape CCD cameras, and more. The following adapters are included: SCT/EdgeHD, female M48, female M42 (T-thread), male M48, male M42 (T-thread), 3 T-thread adapters.

     

    Celestron Off-Axis Guider Specifications

    • Weight: 18 oz
    • Clear Aperture: 48 mm
    • Helical Focuser Travel: 8 mm
    • Telescope Connection: M42 T-thread, M48, and SCT/EdgeHD
    • Autoguider Connection: M42 T-thread, and standard 1.25 Inch adapter
    • Camera Connection: M42 T-thread, and M48

      Additional Information

      ConditionVery good
      ManufacturerCelestron
      Warranty90 Day Covered By OPT
    • Celestron's Off-Axis Guider
    • 12.5 mm Multi-Coated Prism
    • Fixed-orientation helical focuser
    • Adapter: 3" SCT/EdgeHD
    • Adapter: female M48
    • Adapter: femal2 M42 (T-thread)
    • Adapter: male M48
    • Adapter: male M42 (T-thread)
    • T-thread spacers set

    Questions & Answers

    Have a Question?

    Be the first to ask a question about this.

    Ask a Question