TPO 8" f/4 Imaging Newtonian w/ Advanced VX Mount & Polar Finder - Discontinued
TPO 8" f/4 Imaging Newtonian w/ Advanced VX Mount & Polar Finder - Discontinued
The 8" Imaging Newtonian from TPO is one of the great value telescopes perfect for any astrophotographer, and here it is packaged with a mount and polar alignment finder! All of our Imaging Newtonian optical tube assemblies, offered in apertures from 6" - 12", have very fast optics for the widest fields possible. Image with a DSLR or small webcam all the way up to large sensor CCD cameras with these inexpensive yet effective Newtonians.
The optics on all TPO Imaging Newtonians consist of a parabolic primary mirror and an elliptical secondary, or diagonal. The mirrors are made from B270 white water optical crown glass, which is more thermally stable than glass traditionally used on other reflectors. A 91% aluminum coating is applied, and then over-coated with a layer of quartz for the ultimate in durability. The primary mirror cell is very sturdy, and has six collimation knobs that can be adjusted by hand with a push or pull of the knob. Collimation is made even easier due to the center spot marked on the primary mirror. The diagonal mirror is held in place with a thin four-vane spider.
The optical tube assembly on the TPO Imaging Newtonian telescope is made of rolled steel and painted white. The ends of the tube are die-cast aluminum, which contribute to the OTA's rigidity. Steel is a bit heavier than traditional aluminum, but since it has a lower coefficient of thermal expansion, your telescope will tend to hold its shape (and therefore, hold focus) as temperatures fluctuate throughout the night. The inside of the OTA is painted in a matte black finish, which stops stray light in its tracks.
A low vibration cooling fan is built into the primary mirror cell of the telescope to assist in cooling your optics down quickly. The fan is powered by a eight (8) AA batteries (not included) which are housed in an external battery pack.
A 2" dual-speed Crayford-style focuser rounds out this package. The ridged focusing knobs are easy to turn, even with gloves on, and the 10:1 microfocusing dial allows for very small changes, or tweaks, in focus. It takes ten turns of the microfocusing knob to equal just one turn of the larger knob. There is also a little knob on the bottom of the focuser that controls the tension, so that you can make adjustments depending on the weight or distribution of your load. You will also receive a 1.25" compression ring adapter for use with 1.25" eyepieces, and a 35mm extension tube to help you match the back-focus requirements of your imaging equipment. The telescope comes with dual split-hinged mounting rings that are made of die-cast aluminum and felted on the inside to cradle the OTA without scratching. There are threaded holes on the underside of the rings that allow installation on either a Vixen-style (included) or Losmandy-style dovetail plate. The top of the rings is also drilled so that you can mount accessories.
All TPO Imaging Newtonians come with an 8x50 straight-through finderscope. The ocular has a non-illuminated crosshair and has 13mm of eye relief. A quick-release mounting bracket is also included, and a dovetail foot is already installed on the OTA for easy on-off.
- Aperture: 8"
- Focal Ratio: F/4
- Focal Length: 800mm
- White rolled steel exterior, flat black interior for higher contrast
- 2" dual-speed 10:1 linear Crayford-style focuser with 35mm extension & 1.25" adapter
- Dual hinged rings with Vixen-style dovetail
- Cooling Fan included.
- Push/pull oversized collimation knobs for easy adjustments
- Weight: 16 lb.
The Advanced VX equatorial mount from Celestron was engineered from the ground up with astro-imaging in mind, and sets a new standard in mid-level telescopes on the market today. The Celestron Advanced VX provides you with many of the features found on sophisticated German equatorial mounts, at an extremely affordable price.
The Celestron Advanced VX equatorial mount is specifically designed to provide optimum imaging performance for telescopes that weigh thirty (30) pounds or less. With the Advanced VX, you'll be able to track through long exposures using permanently programmable periodic error correction, or image across the meridian without doing a meridian flip, so you can seamlessly image the best part of night sky. You can also enjoy features like All-Star Polar Alignment and auto guider support. The Advanced VX has a significantly larger base than Celestron's CG5 mount, improving stability under heavy loads. The motors have also been improved. They now offer more torque and can more easily handle slight load imbalances.
Experienced imagers will love taking this portable mount to a dark sky site, knowing that they can experience much of the performance of their larger stationary mount. New amateur astronomers will also benefit greatly from the advanced features of the Celestron VX mount. They can rest easy knowing the mount they have chosen will serve them for a long time to come, whether they wish to do visual or imaging work or a combination of the two.
- Integer gear ratios and permanently programmable Periodic Error Correction on the Celestron Advanced VX mount eliminates recurring track errors from the worm gear.
- The motors of the VX mount offer improved tracking performance & provide more power to overcome load imbalances.
- The updated industrial design of the Advanced VX offers more rigidity, less flexure and improved aesthetics.
- The Celestron VX design allows viewing or imaging across the meridian without interference from the motors housings.
- The Advanced VX mount can be used between 7 to 77 degrees latitude, incorporating a much larger latitudinal range than normally seen on equatorial mounts.
- The improved electronics on the Advanced VX contain increased memory for future expansion.
- A Celestron NexStar+ hand control offers multiple language programming (English, French, Italian, German, Spanish)
Celestron Advanced VX Mount Specifications
- Tripod: Adjustable, Stainless Steel
- Tripod Legs: 2"
- Power Supply: Car battery adapter
- EQ Mount Weight: 17 lbs (7.71 kg)
- Total Weight (lbs): 46 lbs (21 kg)
- Tripod Height (Max): 64" in (1626 mm)
- Tripod Height (Min): 44" in (1118 mm)
- Tripod Weight: 18 lbs (8.16 kg)
- Counterweight Bar: 12" Length, 0.75" Diameter lbs (5.44 kg)
- Counterweights: 2 x 11 lbs
- Payload Capacity: 30 lbs (14 kg)
- Latitude Range: 7-77 degrees
- Motor Drive: Low cog DC Servo motors with encoders, both axes
- Slew Speeds: Nine slew speeds, 4 deg/sec maximum
- Tracking Rates: Sidereal, Solar and Lunar
- Tracking Modes: EQ North and EQ South
- Alignment Procedures: 2-Star Align, Quick Align, 1-Star Align, Last Alignment, Solar System Align
- Communication Ports: 2x AUX ports, Autoguider port, RS-232 port (on hand control)
- Computer Hand Control: Double line, 16 character Liquid Crystal Display; 19 fiber optic backlit LED buttons
- Database: 40,000+ objects, 100 user defined programmable objects. Enhanced information on over 200 objects
- Power Requirements: 12V DC 3.5A (tip positive)
- Internal Clock?: Yes
- GPS?: Optional SkySync GPS Accessory
TPO Product Number: BLK-8IN
Questions & AnswersAsk a Question
Overview text says there's an 'extra' 11 lb counterweight included in this package. Is that in addition to the 11 lber that's standard with the AVX mount? In other words, 11 or 22 lbs of counterweight?
The package includes a second 11 lb weight for a total of 22 lbs of weight. With the ~19 lbs of the scope with accessories on top, both weights are needed to keep the scope balanced.
What is the back focus distance on this scope? That is, how far from the top of the fully racked-in focuser to the focal plane?
We do not currently have the scope to take accurate measurements, but there is enough room for a DSLR + T ring (55mm), MPCC coma corrector (3mm flange) plus a little bit of focuser extension (~8-12mm), so the total back focus is approximately 65-70mm abov