QSI 620WSG Monochrome CCD Camera - Mechanical Shutter, 5-Position CFW & Integrated Guide Port

  • Sale
  • Regular price $4,490.00
  • QSI 620WSG Monochrome CCD Camera - Mechanical Shutter, 5-Position CFW & Integrated Guide Port

    • Sale
    • Regular price $4,490.00
    • ITEM #



    QSI 620WSG Monochrome CCD Camera - Mechanical Shutter, 5-Position CFW & Integrated Guide Port

    About the QSI 620 WSG Monochrome CCD Camera

    The QSI 620wsg CCD camera uses a 2.0 megapixel Kodak (now TrueSense) interline transfer CCD imaging sensor as its light-gathering source. The KAI-2020 has excellent quantum efficiency between 350nm and 1000nm with significant enhancement at the blue end of the spectrum. Micro lenses cover the surface of the CCD to focus the light into each 7.4um pixel to increase optical response. The superb imaging performance of the 620 WSG camera is wrapped in an attractive, compact design with outstanding power efficiency and investment protecting upgradeability. The refined engineering and impressive fit, finish and attention to detail will surpass your highest expectations.The QSI 620wsg camera system is supported by industry-leading astronomy and microscopy image acquisition software, and a full camera control API is available for creating custom Windows or Linux applications.

    QSI 620WSG CCD Camera Highlights

    • The QSI 620 camera comes with a TrueSense KAI-2020M monochrome sensor with 2.0MP, micro lens technology and anti-blooming protection.
    • All ƒ????????WSGƒ???????? models include an Integrated Guider Port (IGP)
    • A 5-Position Color Filter Wheel comes ready for your threaded 1.25ƒ???????? filters
    • High speed USB 2.0 with 16-bit output
    • Dual read rates of 800kHz and 8MHz with virtually undetectable read noise
    • Electronic shutter speeds to 100 microseconds
    • Internal, even-illumination mechanical shutter for dark & bias frames
    • Intelligent, programmable two stage TEC cooling to 45C below ambient
    • ASCOM-compatible Windows COM API
    • Linux drivers and API

    About the KAI-2020 Imaging Sensor

    The QSI 620wsg camera employs a Kodak KAI-2020 interline transfer CCD image sensor with micro-lensing technology. The KAI-2020 has excellent quantum efficiency between 350nm and 1000nm with significant enhancement at the blue end of the spectrum. Low dark current and high pixel charge capacity results in a dynamic range exceeding 74db. With the fast electronic shutter and 8MHz High Speed read mode, the QSI 620 can produce frame rates of up to 20 frames per second (fps) when reading a Region of Interest (ROI), or 9 fps for low resolution full-frame 16-bit images.

    Kodak KAI-2020M Specifications

    • CCD Architecture: Interline Transfer
    • Micro-lensing: Yes
    • Anti-Blooming: Yes, 100X suppression
    • Imager Size: 11.84 mm Wide x 8.88 mm High
    • Pixel Array: 1600 x 1200 active pixels
    • Total Number of Pixels: 2.0 megapixels
    • Pixel Size: 7.4???m x 7.4???m
    • Quantum Efficiency: Peak: 55% at 500nm
    • Pixel Dark Current: <0.1 electrons per second at 0???C
    • Intrinsic Read Noise: <8 electrons RMS
    • Charge Transfer Efficiency: >0.99999
    • Dynamic Range: 74db

    About QSI Two-Stage TEC Cooling

    The QSI 620wsg has a very efficient custom 2-stage thermoelectric cooler (TEC) subsystem. Intelligent, programmable cooling fans are integrated into the rear of the camera body to remove the heat generated by the cooler. Typically, forced air cooling lowers the regulated CCD temperature by up to 45???C below ambient utilizing 85% power. Tight +/- 0.1???C temperature regulation is maintained at temperature settings of 10???C below ambient and lower. A slim liquid heat exchanger (sold separately) can be attached to the rear of the camera body to increase the cooling further, up to 55???C below the temperature of the circulating fluid.

    The cooled CCD image sensor is positioned in a hermetically sealed environmental chamber and covered with an anti-reflection precision optical window. The sealed chamber is purged with an ultra dry noble gas to increase heat conduction and eliminate the possibility of frost forming inside the chamber. To extend the useful period before re-purging is required, a user-rechargeable micro-sieve desiccant is employed to scavenge water molecules that enter the chamber. It is located behind a sub-micron, gas-permeable membrane to prevent particulate contamination of the CCD chamber.

    QSI Integrated Guide Port WSG Upgrade

    The QSI 600 Series WSG cameras provides a solution to the problems normally associated with guiding by integrating a Guider Port directly into the camera body. The pick-off prism is designed to sit in front of the filters so that you will always have all the star's light available for guiding.

    The large 1/2ƒ???????? square pick-off prism of the integrated guide port is optimally positioned close to the internal filter wheel, supporting the use of guide cameras with large sensors, while preventing any vignetting of the main sensor, even with very fast optical systems. The Integrated Guide Port (IGP) is designed to support any camera with 12.5mm of back focus or less that can be attached using C-mount or T-mount threads.

    The threaded adapter sits on top of the focus ring and allows the guide camera to be rotated to any position. The focus ring threads onto the focus base to allow 3mm of travel when focusing the guide camera. Once focus is achieved, the focus ring is locked with a set screw. The guide camera can still be rotated manually if desired without changing the focus. The end result is a rigid, easily focused guide camera that will not move or flex while your mount tracks the apparent motion of the night sky.

    Additional Information

    Camera Cooling Typeelectric Cooling (TEC)
    Camera SeriesQSI 600
    CCD ClassStandard
    Dark Current<0.1 electrons per second at 0 degreesC
    Filter WheelYes
    Free ShippingYes
    Front or Back IlluminationFront
    Integrated GuiderNo but includes Integrated Guide Po
    InterfaceUSB 2.0
    Operating System CompatibilityLinux (3rd Party) & Windows
    Pixel Array1600 x 1200 active
    Pixel Size7.4???m x 7.4???m
    Quantum Efficiency55% at 500nm
    Sensor DesignInterline Transfer
    Sensor ManufacturerTruesense formerly Kodak
    Sensor TypeMonochrome (B&W)
    Shutter TypeDigital & Mechanical
    Single or Dual SensorSingle
    Warranty1 Year Warranty

    Questions & Answers

    Have a Question?

    Be the first to ask a question about this.

    Ask a Question

    Make easy monthly payments over 3, 6, or 12 months

    Rates from 10–30% APR.

    Quick and easy

    Enter a few pieces of information for a real-time decision. Checking your eligibility won't affect your credit score.

    No hidden fees

    Know up front exactly what you'll owe, with no hidden costs and no surprises.

    Just select Affirm at checkout.